The Summicron-T 23mm f/2 ASPH Lens from Leica is a prime lens that offers a 35mm-equivalent focal length of 35mm. It has a maximum aperture of f/2 and a minimum aperture of f/16. There are nine elements in six groups with two aspherical surfaces. Front and rear lens caps as well as a pouch are all included to help protect your lens. Description of Chaotica 2.0.23. Chaotica 2.0.23 is a next-generation fractal art application, designed for both novices and professional artists. Novice users can enjoy editing randomised fractals to produce stunning HD wallpapers and animations. Professional users will particularly value the fast, modern rendering engine. May 08, 2019 In the US, needle sizes start at 0 and increase to 50. However, in the UK, sizes start at 14 and go up to 000. In Japan, knitting needles use different standard metric sizes, starting at 2.1 mm and going up to 25 mm. To help you decipher the world of knitting needle sizes, refer to the charts below! Chaotica Fractals v2.0.23 x64. Discussion in '2D' started by brainsgonedead2000, Feb 28, 2020. Tags: animated fractals. 2.0.23. Added Render Render Animation.
Tap size Diameter (in) Diameter (mm) Thread count (TPI) Thread pitch (mm) Tap drill size M14x2 0.55 13 2.000 12 mm M15x1 0.59 26 1.000 14 mm.
Hydraulic tubes and instrumentation tubes in a comprehensive range of corrosion-resistant stainless steels and nickel alloys covering outside diameters from (OD) 1.59 to 50 mm (0.0625 to 1.968 in.). All sizes are supplied with smooth surfaces and close dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.
Standard delivery form for Sandvik hydraulic and instrumentation tube is straight lengths of 6 meters, but our tubes can also be delivered as coiled tubing, contributing to reduced installation costs.
Tubes with high cleanliness
Sandvik hydraulic tubes and instrumentation tubes are characterized by high cleanliness, and tubes with OD larger than 5 mm (0.196 in.) can be delivered with plugged ends for transport protection against inside contamination.
Grades
Grades and standards
The tables show Sandvik's standard grades for hydraulic and instrumentation tubing. Other grades can be offered on request.
Sandvik grade | UNS | ASTM | EN no. |
---|---|---|---|
Sandvik SAF 2507® | S32750 | - | 1.4410 |
Sandvik SAF 2205™ | S31803/S32205 | - | 1.4462 |
Sandvik SAF 2304® | S32304 | - | 1.4362 |
Sandvik grade | UNS | ASTM | EN no. |
---|---|---|---|
Sanicro® 70 | N06600 | Alloy 600 | - |
Sanicro® 60 | N06625 | Alloy 625 | 2.4856 |
Sanicro® 41 | N08825 | Alloy 825 | - |
Sanicro® 30 | N08800 | Alloy 800 | 1.4558 |
Sanicro® 28 | N08028 | - | 1.4563 |
Sandvik 2RK65 | N08904 | - | 1.4539 |
S31254 | - | 1.4547 | |
- | N04400 | - | - |
- | N02200 | - | - |
Sandvik grade | UNS | ASTM | EN no. |
---|---|---|---|
Sandvik 8R40 | S34700/S34709 | 347/347H | 1.4550/1.4912 |
Sandvik 5R75 | S31635 | 316Ti | 1.4571 |
Sandvik 3R65 | S31603/S31600 | 316L/316 | 1.4404/1.4401 |
Sandvik 3R60™ | S31603/S31600 | 316L/316 | 1.4435/1.4436 |
Sandvik 6R35 | S32100/S32109 | 321/321H | 1.4541/1.4940 |
Sandvik 3R12 | S30403/S30400 | 304L/304 | 1.4306/1.4301 |
* 254 SMO is a trademark of Outokumpu OY.
Standards
Sandvik 3R12 and Sandvik 3R60™
- EN 10216-5 TC1
- ASTM A213-AW (average wall)
- ASTM A269
- PED 97/23/EC
- OD <6 mm according to A632
- NACE MR0175/ISO 15156
Sandvik 5R75
- EN 10216-5
- PED 97/23/EC
254 SMO (UNS S31254)
- EN 10216-5 TC1
- ASTM A269
- PED 97/23/EC
- NACE MR0175/ISO 15156
Sandvik 2RK65™ (UNS N08904)
- EN 10216-5 TC1
- ASTM A213 A269
- PED 97/23/EC
- NACE MR0175/ISO 15156
Sanicro® 28 (UNS N08028)
- EN 10216-5 TC1
- ASTM B668
- PED 97/23/EC
- NACE MR0175/ISO 15156
Sanicro® 60 (UNS N06625)
- ASTM B444, Grade 1 and Grade 2
- ASME SB444, Grade 1 and Grade 2
- ISO 6207
Sandvik SAF 2507® (UNS S32750)
- EN 10216-5 TC1
- ASTM A789
- PED 97/23/EC
- NACE MR0175/ISO 15156
![Chaotica Chaotica](https://i1.wp.com/is2-ssl.mzstatic.com/image/thumb/Purple2/v4/3c/c4/7a/3cc47a17-4404-9055-5e2a-1b4bbef7ad3d/mzl.tkwddzan.png/800x500bb.jpg?w=700&ssl=1)
Metric sizes
Metric standard sizes
Tubes with OD up to and including 25,4 mm (1.0 in.) are supplied bright annealed. Tubes with OD larger than 25.4 mm are supplied in the annealed and pickled condition. Standard length = 6 meters.
For information about maximum working pressure for each size and grade, use our pressure calculation tool. Abbyy finereader online.
OD mm | WT mm | Kg/m | Sandvik 3R12 | Sandvik 3R60™ | Sandvik 5R75 | Sandvik 254 SMO |
---|---|---|---|---|---|---|
0.5 | - | C | - | - | ||
0.7 | - | C | - | - | ||
1.0 | C | C | C | |||
1.5 | - | C | - | |||
8 | 0.18 | C | - | |||
8 | 0.24 | C | - | |||
8 | 0.30 | C | - | - | ||
1.0 | C | C | - | |||
1.5 | C | C | C | |||
2.0 | C | C | - | |||
1.0 | C | C | C | |||
1.5 | C | C | C | |||
2.0 | C | C | C | |||
1.0 | C | - | - | |||
14 | 0.47 | - | - | - | ||
14 | 0.60 | C | - | |||
15 | 0.35 | C | - | - | ||
1.5 | C | C | - | |||
2 | C | C | - | |||
1.0 | C | - | - | |||
16 | 0.54 | C | - | |||
16 | 0.70 | C | - | |||
16 | 0.85 | - | C | - | ||
18 | 0.43 | C | - | - | ||
1.5 | C | C | - | |||
2.0 | C | C | C | |||
2.5 | - | - | C | - | ||
1.5 | - | C | - | |||
20 | 0.90 | C | - | |||
20 | 1.09 | - | C | - | ||
3.0 | - | - | C | - | ||
1.5 | C | C | - | |||
2.0 | C | C | - | |||
1.5 | C | - | - | |||
25 | 1.15 | C | C | |||
25 | 1.41 | C | - | |||
25 | 1.65 | C | - | |||
28 | 0.88 | C | - | |||
28 | 1.15 | C | - | |||
28 | 1.60 | C | - | - | ||
2.5 | - | C | - | - | ||
3.0 | C | C | - | |||
4.0 | - | C | - | |||
35 | 1.65 | C | C | - | ||
2.5 | - | - | - | |||
35 | 2.40 | C | - | - | ||
2.0 | - | - | - | |||
38 | 2.63 | C | - | |||
38 | 3.41 | - | C | - | ||
5.0 | - | C | - | |||
42 | 2.00 | - | C | - | ||
42 | 2.93 | C | - | |||
50 | 5.63 | - | - | - |
OD = outside diameter
WT = wall thickness
WT = wall thickness
Size OD, mm | Tolerances OD, mm | Wall thickness % |
---|---|---|
<4.76-2.38 | +0.08/-0 | +/- 10 |
Size OD, mm | Tolerances OD, mm | Wall thickness % |
---|---|---|
6-30 | +/-0.08 | +/-10 |
32-40 | +/-0.15 | +/-10 |
42 | +/-0.20 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness % |
---|---|---|
6-25 | +/-0.13 | +/-10 |
Imperial sizes
Imperial standard sizes
Tubes with OD up to and including 1.0 in. (25.4 mm) are supplied bright annealed. Tubes with OD larger than 1.0 in. are supplied in the annealed and pickled condition. Standard length = 6 meters.
For information about maximum working pressure for each size and grade, use our pressure calculation tool.
Imperial size1) | OD mm | WT mm | Kg/m | Sandvik 3R12 | Sandvik 3R60™ | Sandvik 2RK65™ | Sandvik SAF 2507® | Sanicro® 28 | Sanicro® 60 | 254 SMO* |
---|---|---|---|---|---|---|---|---|---|---|
1/16' x 28 BWG | 0.36 | - | C | - | - | - | - | - | ||
1/16' x 25 BWG | 0.51 | - | C | - | - | - | - | - | ||
1/8' x 22 BWG | 0.71 | - | C | - | - | - | - | - | ||
1/8' x 20 BWG | 0.89 | - | C | - | - | - | - | - | ||
3/16' x 20 BWG | 0.89 | - | C | - | - | - | - | - | ||
1/4' x 22 BWG | 0.71 | - | - | - | - | - | - | |||
1/4' x 20 BWG | 0.89 | C | C | - | C | C | ||||
1/4' x 20 SWG | 6.35 | 0.124 | C | - | - | - | - | |||
1/4' x 18 SWG | 6.35 | 0.157 | C | - | - | - | - | |||
1/4' x 18 BWG | 6.35 | 0.159 | - | C | - | C | C | |||
1/4' x 16 SWG | 6.35 | 0.193 | - | C | - | - | - | - | ||
1/4' x 16 BWG | 1.65 | - | C | C | - | C | - | |||
5/16' x 20 BWG | 7.94 | 0.157 | - | - | - | - | - | - | ||
5/16' x 20 SWG | 7.94 | 0.160 | - | - | - | - | - | - | ||
3/8' x 20 BWG | 9.53 | 0.193 | C | C | - | C | - | |||
3/8' x 20 SWG | 0.91 | - | C | - | - | - | - | |||
3/8' x 18 SWG | 1.22 | - | C | - | C | - | ||||
3/8' x 18 BWG | 9.53 | 0.257 | - | C | C | - | ||||
3/8' x 16 SWG | 9.53 | 0.322 | - | C | - | - | - | |||
3/8' x 16 BWG | 1.65 | - | C | C | C | C | ||||
3/8' x 14 SWG | 2.03 | - | C | - | - | - | - | - | ||
3/8' x 14 BWG | 2.11 | - | C | - | - | - | C | - | ||
1/2' x 20 SWG | 0.89 | - | C | - | C | - | ||||
1/2' x 20 BWG | 12.7 | 0.268 | C | - | - | - | - | |||
1/2' x 18 SWG | 12.7 | 0.350 | C | - | - | - | - | |||
1/2' x 18 BWG | 12.7 | 0.356 | C | C | - | C | - | |||
1/2' x 16 SWG | 1.63 | C | C | - | - | - | ||||
1/2' x 16 BWG | 1.65 | C | C | C | C | |||||
1/2' x 14 SWG | 12.7 | 0.542 | - | C | - | - | - | - | ||
1/2' x 14 BWG | 2.11 | - | C | - | - | C | C | |||
5/8' x 18 SWG | 15.88 | 0.448 | - | - | - | - | - | - | ||
5/8' x 18 BWG | 15.88 | 0.454 | - | - | - | - | - | - | ||
5/8' x 16 SWG | 15.88 | 0.582 | - | - | - | - | - | - | ||
5/8' x 16 BWG | 15.88 | 0.588 | - | - | - | - | - | - | ||
3/4' x 18 SWG | 19.05 | 0.544 | - | - | - | - | - | - | ||
3/4' x 18 BWG | 19.05 | 0.553 | - | - | C | - | - | - | ||
3/4' x 16 SWG | 1.63 | - | C | - | - | - | - | - | ||
3/4' x 16 BWG | 1.65 | - | C | - | - | - | - | - | ||
3/4' x 14 BWG | 2.11 | - | C | - | - | - | - | - | ||
3/4' x 13 BWG | 2.41 | - | C | - | - | - | - | - | ||
3/4' x 12 BWG | 2.77 | - | C | - | - | - | - | - | ||
1' x 18 SWG | 1.22 | - | C | - | - | - | - | - | ||
1' x 18 BWG | 1.24 | - | C | - | - | - | - | - | ||
1' x 16 BWG | 1.65 | - | C | - | - | - | - | - | ||
1' x 14 BWG | 2.11 | - | C | - | - | - | - | - | ||
1' x 13 BWG | 2.41 | - | C | - | - | - | - | - | ||
25.4 | 1.78 | - | - | - | - | - | - |
SWG = Standard Wire Gauge, BWG = Birmingham Wire Gauge
OD = outside diameter
WT = wall thickness
OD = outside diameter
WT = wall thickness
Tolerances
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
< 6–4.76 | +0.10 / -0 | +/-10 |
< 4.76–2.38 | +0.08 / -0 | +/-10 |
< 2.38 | +0.05 / -0 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
6.35 - 25.4 | +/-0.08 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
≤ 25.4 | +/-0.10 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
≤ 19.05 | +/-0.13 | +/-10 |
* 254 SMO is a trademark owned by Outukumpu OY.
Testing
Testing of stock standard tubing in straight condition
Sandvik hydraulic and instrumentation tubing are tested according to the standards as follows.
Standard | Tensile | Flattening | Corrosion | |
---|---|---|---|---|
EN 10216-5 TC1 | S | - | S1) | T 2) |
ASTM A269 | - | - | - 5) | |
ASTM A213 | S 3) | S | S | T 2) |
ASTM A789 | S | - | - | |
ASTM B668 | S | - 6) | S | T 2) |
ASTM A632 | S | - | - 5) |
S = Sampling, T = 100%
1) Either flaring or flattening test depending on tube size.
2) Eddy Current or hydrostatic test at option of Sandvik.
3) Also product analysis of a billet or tube from each heat.
4) Sandvik performs EN ISO 3651-2 Method A.
5) Sandvik performs ASTM A262 PrE.
6) Sandvik performs hardness test.
Coiled tubing
Coiled tubing
Sandvik stainless hydraulic tubes and instrumentation tubes can also be delivered in coils, contributing to reduced installation cost due to:
- Fewer connections
- Higher degree of materials utilization
- Improved system integrity
Metric sizes - standard sizes
(other sizes and lengths can be offered on request)
OD mm | WT mm | Orbital welded length, m | |
---|---|---|---|
0.5 | - | ||
3.0 | 400 | - | |
1.0 | - | ||
3.5 | 400 | - | |
0.75 | - | ||
3.5 | 350 | - | |
1.5 | - | ||
4.0 | 350 | - | |
0.75 | - | ||
4.0 | 300 | - | |
1.5 | - | ||
6.0 | 594 | ||
6.0 | 515 | ||
6.0 | 440 | ||
8.0 | 424 | ||
8.0 | 364 | ||
8.0 | 304 | ||
10.0 | 330 | ||
10.0 | 281 | ||
10.0 | 233 | ||
10.0 | 2.0 | 182 | |
12.0 | 270 | ||
12.0 | 229 | ||
12.0 | 188 | ||
12.0 | 2.0 | 146 |
OD = outside diameter
WT = wall thickness
WT = wall thickness
Imperial sizes - standard sizes
(other sizes and lengths can be offered on request)
Size, in. | Orbital welded length, ft |
---|---|
1,300 | - |
1,300 | - |
1,300 | - |
1,300 | - |
1,000 | - |
950 | - |
750 | - |
600 | - |
2.005 | |
1/4 x .049 | 27,864 |
1.256 | |
3/8 x .035 | 23,100 |
941 | |
3/8 x .065 | 13,661 |
612 | |
1/2 x .035 | 16,899 |
681 | |
1/2 x .065 | 9,740 |
427 | |
5/8 x .035 | 13,313 |
325 | |
5/8 x .065 | 7,565 |
203 | |
3/4 x .035 | 10,990 |
266 | |
3/4 x .063 | 6,187 |
*Minimum guaranteed length for ASTM 316/316L.
Standards
ASTM | A213, A269, B163, B167, B668, A632, A789, A790 |
ASME | SA213, SB163, SB167, SB668, SA789, SA790 |
NACE | MR 0175 |
EN | 10216-5 TC1 |
Eddy Current or hydrostatic test at option of Sandvik.
Product Description | Product Codes | Scope Channel | Cup Opening Size |
Disposable EndoJaw | FB-211D.A/221D.A/231D.A/241D.A | 2.0 mm | 5.0 mm |
Reusable Biopsy Forceps | FB-35C-1/55CR-1 | 2.8 mm | 7.3 mm |
Reusable Biopsy Forceps | FB-20C-1/22C-1 | 2.6 mm | 5.0 mm |
Reusable Biopsy Forceps | FB-19C-1/19CR-1/34C-1/21C-1/15C-1/52C-1 | 2.0 mm | Multiple (please refer to catalog) |
Reusable Biopsy Forceps | FB-56D-1 | 1.2 mm | 7.3 mm |
Olympus Training & Proper Use
Olympus offers a variety of educational opportunities for medical and surgical healthcare professionals.
Game 2.0
Peer-To-Peer Training
Our Professional Education Program provides multiple types of peer-to-peer training in order to meet the specific educational needs of physicians and nurses focused on the safe and effective use of Olympus products.
2 Divided By 0
Olympus University
Olympus Professional Education also offers training programs through Olympus University (OU). Geared toward nurses, reprocessing technicians and biomeds, many of the OU courses are available for nursing contact hour continuing education credit.
2.0 Facebook
Visit Olympus University